脊髓灰质炎病毒Ⅲ型Sabin株C抗原和D抗原的分离及特性分析

目的分离脊髓灰质炎病毒Ⅲ型Sabin株(sPVⅢ)C抗原和D抗原,并分析其部分特性。方法采用CsCl密度梯度离心法分离sPVⅢ的C抗原和D抗原,电镜观察病毒形态;SDS-PAGE检测病毒结构蛋白组成;微量BCA法检测蛋白浓度,计算每种抗原所占比例;细胞病变法检测病毒滴度。同时检测上样浓度及超离次数对C抗原纯度的影响。结果sPVⅢC抗原和D抗原在透射电镜下均呈球形,C抗原病毒颗粒密度较小,外壳大多较为松散,D抗原病毒颗粒密度较大,结构更稳固;C抗原由VP0、VP1、VP3蛋白组成,D抗原由VP1、VP2、VP3和VP4蛋白组成;C抗原和D抗原分别约占总蛋白含量的10%和90%,部分C抗原在分离前及分离过程中易产生聚集;D抗原的病毒滴度高于C抗原。降低上样浓度及进行二次超离可提高C抗原纯度。结论采用CsCl密度梯度离心法成功分离了sPVⅢ的C抗原和D抗原,C抗原滴度远低于D抗原,且部分易产生聚集,较难达到较高纯度。     

Adaptive neuro-fuzzy algorithm applied to predict and control multi-phase flow rates through wellhead chokes

A Takagi-Sugeno adaptive neuro-fuzzy inference system (TSFIS) model is developed and applied to a dataset of wellhead flow-test data for the Resalat oil field located offshore southern Iran, the objective is to assist in the prediction and control of multi-phase flow rates of oil and gas through the wellhead chokes. For this purpose, 182 test data points (Appendix 1) related to the Resalat field are evaluated. In order to predict production flow rate (Q_L) expressed as stock-tank barrels per day (STB/D), this dataset includes four selected input variables: upstream pressure (Pwh); wellhead choke sizes (D64); gas to liquid ratio (GLR); and, base solids and water including some water-soluble oil emulsion (BS&W). The test data points evaluated include a wide range of oil flow rate conditions and values for the four input variables recorded. The TSFIS algorithm applied involves five data processing steps: a) pre-processing, b) fuzzification, c) rules base and adaptive neuro-fuzzy inference engine, d) defuzzification, and e) post-processing of the fuzzy model. The developed TSFIS model for the Resalat oil field database predicted oil flow rate to a high degree of accuracy (root mean square error = 247 STB/D, correlation coefficient = 0.9987), which improves substantially on the commonly used empirical algorithms used for such predictions. TSFIS can potentially be applied in wellhead choke fuzzy controllers to stabilize flow in specific wells based on real-time input data records.     

朝凯煤矿露天台阶爆破装药结构优化应用研究

本文以神达朝凯煤矿正在开采的台阶为工程背景,针对该矿在台阶爆破过程中存在着大块率高、根底多的现象,通过改变装药结构的方式对爆破参数进行优化。实践证明,优化后大块率和根底问题的治理效果明显。     

近50年大黑河流域气候水文要素变化趋势及突变分析

基于大黑河流域6个气象站1966～2013年气温、降水量、蒸发皿蒸发量、相对湿度和日照时数长期数据系列,采用气候倾向率和滑动t检验法分析了近50年大黑河流域气象要素的变化趋势及变异年份。结果表明,大黑河流域整体呈现暖干气候倾向,气温呈显著增高趋势,变化率为0.43～0.57℃/10a,气温增温变点大致出现了两次,分别在1986、1997年;降水量和蒸发量多呈不显著减少趋势,降水量先减(1981年)后增(1990年),蒸发皿蒸发量先减(1986年)后增(1996年);相对湿度、日照时数多呈显著减小趋势。     

移动物料信息分布式传输方法及应用

在流程工业生产中,移动物料计量信息的传输普遍采用电台和无线模块。接收电台周围环境严重影响计量信息的传输效果,尤其是钢结构厂房、电磁干扰区内,数据传输过程中的丢包率、误码率相当严重。本文提出一种多节点分布式传输方法,根据各个生产作业区环境条件设置相应的WIFI节点数,实现对作业区的无线信号覆盖。网络覆盖区内无线模块、PDA终端(PDA)、终端查询设备通过节点工作频段和阵列天线自适应调节,实现数据传输最佳化。铜熔炼生产现场测试表明,此种传输方法可以有效消除周围环境的电磁干扰,数据丢包率低于0.1%。     

Electrochemical hydrogen storage performance of as-cast and as-spun RE-Mg-Ni-Co-Al-based alloys applied to Ni/MH battery

The La-Mg-Ni-Co-Al-based AB₂-type La_0.8–xCe_0.2Y_xMgNi_3.4Co_0.4Al_0.1 (x=0, 0.05, 0.1, 0.15, 0.2) alloys were prepared via melt spinning. The analyses of the X-ray diffraction (XRD) and scanning electron microscopy (SEM) proved that the experimental alloys contain the main phase LaMgNi₄ and the second phase LaNi₅. Increasing Y content and spinning rate lead to grain refinement and obvious change of the phase abundance without changing phase composition. Y substitution for La and melt spinning make the life-span of the alloys improved remarkably, which is attributed to the improvement of anti-oxidation, anti-pulverization and anti-corrosion abilities. In addition, the discharge capacity visibly decreases with increasing the Y content, while it firstly increases and then decreases with increasing spinning rate. The electrochemical kinetics increases to the optimum performance and then reduces with increasing spinning rate. Moreover, all the alloys achieve to the highest discharge capacities just at the initial cycle without activation.     

Enhanced piezoelectric strain of BiFeO3–Ba(Zr0.02Ti0.98)O3 lead-free ceramics near the phase boundary

The xBiFeO₃-(1-x)Ba(Zr_0.02Ti_0.98)O₃ + 1.0 mol% MnO₂ (xBF-BZT) lead-free piezoelectric ceramics were prepared by conventional solid-state reaction method. The structure, dielectric, and piezoelectric properties were studied. X-ray diffraction (XRD) analysis showed that xBF-BZT ceramics exhibited pure perovskite structure with the coexistence of tetragonal and rhombohedral phases (0.66 ≤ x ≤ 0.74). The Curie temperature T_c, the dielectric constant ε_r (1 kHz), dielectric loss tanδ (1 kHz), piezoelectric constant d₃₃, coercive field E_c (80 kV/cm), and remnant polarization P_r (80 kV/cm) of 0.7BF-0.3BZT-Mn ceramics were 491°C, 633, 0.044, 165 pC/N, 35.6 kV/cm, and 22.6 μC/cm², respectively. The unipolar strain of 0.7BF-0.3BZT reached up to 0.20% under the electric field of 60 kV/cm, which is larger than that (0.15%) of BiFeO₃–BaTiO₃ ceramics. These results indicated that the xBF-BZT ceramics were promising candidates for high-temperature piezoelectric materials.     

In Silico Study on Tumor-Size-Dependent Thermal Profiles inside an Anthropomorphic Female Breast Phantom Subjected to Multi-Dipole Antenna Array

Electromagnetic hyperthermia as a potent adjuvant for conventional cancer therapies can be considered valuable in modern oncology, as its task is to thermally destroy cancer cells exposed to high-frequency electromagnetic fields. Hyperthermia treatment planning based on computer in silico simulations has the potential to improve the localized heating of breast tissues through the use of the phased-array dipole applicators. Herein, we intended to improve our understanding of temperature estimation in an anatomically accurate female breast phantom embedded with a tumor, particularly when it is exposed to an eight-element dipole antenna matrix surrounding the breast tissues. The Maxwell equations coupled with the modified Pennes’ bioheat equation was solved in the modelled breast tissues using the finite-difference time-domain (FDTD) engine. The microwave (MW) applicators around the object were modelled with shortened half-wavelength dipole antennas operating at the same 1 GHz frequency, but with different input power and phases for the dipole sources. The total input power of an eight-dipole antenna matrix was set at 8 W so that the temperature in the breast tumor did not exceed 42 °C. Finding the optimal setting for each dipole antenna from the matrix was our primary objective. Such a procedure should form the basis of any successful hyperthermia treatment planning. We applied the algorithm of multi for multi-objective optimization for the power and phases for the dipole sources in terms of maximizing the specific absorption rate (SAR) parameter inside the breast tumor while minimizing this parameter in the healthy tissues. Electro-thermal simulations were performed for tumors of different radii to confirm the reliable operation of the given optimization procedure. In the next step, thermal profiles for tumors of various sizes were calculated for the optimal parameters of dipole sources. The computed results showed that larger tumors heated better than smaller tumors; however, the procedure worked well regardless of the tumor size. This verifies the effectiveness of the applied optimization method, regardless of the various stages of breast tumor development.     

阶梯溢流坝面坡度对一体化消能工水力特性的影响

为探求高水头、大单宽流量下坝面坡度对一体化消能工水力特性的影响,以阿海水电站为原型,采用三维k-ε双方程紊流模型,引入水气两相流VOF计算方法,利用几何重建格式来迭代生成自由水面,对1∶0.80、1∶0.75、1∶0.65三种阶梯面坡比进行数值模拟研究。结果表明:①最大负压值均位于首级阶梯立面凸角下1/4附近,并随坡度增加而增大。坡度为56.98°时,最大负压值为61.02 kPa,超过了6×9.81 kPa。②水流空化数在宽尾墩水舌出口位置出现最小值,空化数随坡度变陡而减小。坡度为56.98°时,空化数最小为0.358。坡度为51.34°时,空化数最大,为0.381。③随着阶梯溢流坝坝面坡度变缓,消力池最大临底流速增大。当坡度为51.34°时,消力池最大临底流速最大,达到26.84 m/s,超过了25 m/s,易发生冲磨破坏。当坡度为56.98°时,消力池最大临底流速最小,为24.00 m/s。消力池尾坎前最大临底流速随坡度增加而减小,坡度为56.98°时最小,为9.63 m/s;坡度为51.34°时,消力池尾坎前最大临底流速最大,为9.96 m/s。④坡度的变化对一体化消能工消能率的影响不大,坡度从51.34°增加到56.98°,消能率只提升0.15%。     

Heat Transfer Analysis of MHD Power Law Nano Fluid Flow through Annular Sector Duct

Flow and heat transfer analysis of an electrically conducting MHD power law nano fluid is carried out through annular sector duct,under the influence of constant pressure gradient.Two types of nano particles(i.e.Cu and TiO2)are used in power law nano fluid.Strongly implicit procedure,(SIP)is used to simulate the discretized coupled algebraic equations.It has been observed that volume fraction of nano particles,ϕand magnetic field parameter,Ha are favourable for the heat transfer rate,however,both resist the fluid flow.Impact of applied uniform transverse magnetic field exceeds in the case of shear thickening fluids(i.e.n>1)by increasing the value of Ha as compared to that in shear thinning fluids(i.e.n<1).Therefore,enhancement in heat transfer rate is comparably more in shear thickening fluid.Furthermore,comparable limiting case study with published result is also carried out in this research paper.